As of 10th May 2012, new rules for the use of downlights in residential installations have come into effect to reduce the risk of fire when thermal installation is installed.
As of 10th May 2012, new rules for the use of downlights in residential installations have come into effect to reduce the risk of fire when thermal installation is installed. So if you plan to renovate or build, you will only be able to use downlights that comply with the new rules and allow for thermal installation to either abut the fittings (CA 80 and CA 135), or abut and cover the fittings (IC and IC-F).
“With these new regulations, all downlights suitable for installation in a home will need to have insulation abutted to them and still not exceed 135C,” says lighting design expert Stephanie Millar. “New IC rated downlights can be installed in your home but to choose the right downlight to suit your needs you should consult with someone that understands your requirements.”
If the light fitting is IC rated it is safe to cover with insulation as per the manufacturers instructions. Remember, do not cover non-IC or CA rated fittings.
“Some things that you should be aware of when buying the new downlights is that the term ‘insulation’ is only defined in the legislation as ‘thermal, acoustic or similar’ and does not specify that the testing done to classify the downlights be repeated with all types of insulation,” explains Stephanie.
“This means that is you are planning on using any insulation other than the standard fiberglass or ‘pink batts’ it would be best to check with the downlight manufacturer first and get their approval. Also, under these new regulations, loose fill insulation is not allowed to be used unless specifically approved by the downlight manufacturer.”
If you would like further advice on the new downlight legislation visit the Lighting Plus website.
This article featured on page 12 of Renovate Magazine. Renovate Magazine is an easy to use resource providing fresh inspiration and motivation at every turn of the page.
If you would like a free, no obligation initial design and build consultation for your next home renovation project, use the enquiry form alongside to provide us with your contact details. We will get in touch with you at a time that suits you to discuss your project. If you would like to provide us with more information about your renovation, we have a more comprehensive enquiry form on our "Get in touch" page too.
All Refresh Renovations franchises are independently owned and operated.
If you would like to find out how Refresh Renovations can support you with a high quality, efficient home renovation, get in touch today. Your local Refresh Renovations consultant will be happy to meet with you for a free, no obligations consultation.